LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.9L - TDI Engine Mechanical, Fuel Injection Glow Plug, Engine Code(S): BEW (A4 Platform)) >> 10 - Engine - Assembly >> Engine, removing and installing >> Engine and transmission mountings, aligning

Engine and transmission mountings, aligning

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The assembly must be supported with the support device 10-222A before loosening the bolts.
Fig 1: Measuring Engine Mounting
GW00000014Courtesy of VOLKSWAGEN UNITED STATES, INC.

Engine assembly mounting

a = 14.0 mm

b = At least 10.0 mm

Both bolt heads - 1  - must be in flush with edge - c  -.

Fig 2: Measuring Transmission Mounting
GW00000015Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmission assembly mounting

The edges - a  - and - b  - must be parallel with one another.

c = 18 to 20 mm

scientia non olet · About LEMON Manuals