Assembly mountings

WARNING: This page is about a different car, the 2006 Volkswagen Golf, 2005 Volkswagen Jetta, 2005 Volkswagen Golf, 2004 Volkswagen Jetta, and 2004 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Tightening torques

Fig 1: Identifying Engine Mounting Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly mounting, right:

1 -	Mounting to body * See note	40 Nm + 90 ° ( 14 turn) further
2 -	Mounting/bracket to body	25 Nm
3 -	Mounting to engine bracket	100 Nm

* Replace bolts

Fig 2: Identifying Transmission Mounting Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly mounting, left, on vehicles with manual transmission:

1 -	Mounting to body * See note	40 Nm + 90 ° ( 14 turn) further
2 -	Mounting to body	25 Nm
3 -	Mounting to transmission console	100 Nm

* Replace bolts

Fig 3: Identifying Transmission Mounting Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Assembly mounting, left, on vehicles with automatic transmission:

1 -	Mounting to body * See note	40 Nm + 90 ° ( 14 turn) further
2 -	Mounting to body	25 Nm
3 -	Mounting to transmission console	100 Nm

* Replace bolts

Fig 4: Identifying Pendulum Support

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pendulum support

Assembly order:

1 -	Pendulum support to subframe * See note	20 Nm + 90 ° ( 14 turn) further
2 -	Pendulum support to transmission * See note	40 Nm +45 ° ( 18 turn) further
3 -	Pendulum support to transmission * See note	40 Nm +45 ° ( 18 turn) further

* Replace bolts