Bleeding without using pressure bleeder
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Connect hose from bleeder bottle to brake at each wheel using sequence above.
- Pump brake pedal several times and then hold pedal down.
- Open bleeder screw.
- Close bleeder screw.
CAUTION:
The brake fluid level in the reservoir must not fall below the MIN mark during bleeding.
- Release brake pedal.
- Repeat operation until brake fluid flows without air bubbles.