Ignition Coil (N152), checking
WARNING: This page is about a different car, the 1995 Volkswagen Jetta III, 1995 Volkswagen GTI, and 1994 Volkswagen Jetta III. However, it is still accessible from the selected car via links, so may be relevant.
- "Ignition Output 1," "Ignition Output 2" or "Ignition Output 3" displayed by VAG 1551 On Board Diagnostic (OBD) program (function 02, Check DTC Memory).
- Camshaft Position (CMP) Sensor OK (checking, see MOTRONIC IGNITION SYSTEM, CHECKING
).
- Carry out electrical testing, test steps 2 and 24: see ELECTRICAL TESTING WITH (VAG 1598 TEST BOX)
Only if the engine will not start:
- Check voltage supply to Ignition Coil (N152).