Connector Pin Assignment

WARNING: This page is about a different car, the 1995 Volkswagen Jetta III, 1995 Volkswagen GTI, and 1994 Volkswagen Jetta III. However, it is still accessible from the selected car via links, so may be relevant.

Data Link Connector (DLC)

Fig 1: Identifying Connector Pin Assignment (Data Link Connector)
Heated Oxygen Sensor (HO2S) (G39)

Fig 2: Identifying Connector Pin Assignment (Heated Oxygen Sensor)
Camshaft Position Sensor (G40)

Fig 3: Identifying Connector Pin Assignment (Camshaft Position Sensor)
Ignition coil (N152)

Fig 4: Identifying Connector Pin Assignment (Ignition Coil)
Knock sensor (KS) 1 (G61)
Knock Sensor (KS) 2 (G66)

Fig 5: Identifying Connector Pin Assignment (Knock Sensor)
Mass Air Flow sensor (G70) (4-pin connector)

Fig 6: Identifying Connector Pin Assignment (Mass Air Flow Sensor, 4-Pin)
Mass Air Flow (MAF) Sensor (G70) (6 -pin connector)
NOTE: Pin -6- is not used.

Fig 7: Identifying Connector Pin Assignment (Mass Air Flow Sensor, 6-Pin)