Erasing DTC Memory
WARNING: This page is about a different car, the 1995 Volkswagen Jetta III, 1995 Volkswagen GTI, and 1994 Volkswagen Jetta III. However, it is still accessible from the selected car via links, so may be relevant.
- Connect OBD1 adapter to DLC.
- Switch ignition ON.
- Leave adapter connected for at least 5 seconds, then disconnect.
- Connect OBD1 adapter for 2.5 seconds, then disconnect.
- Blink codes displayed
- Repeat until no more codes displayed (0-0-0-0).
- Connect OBD1 adapter again for 2.5 seconds.
- DTC codes will be erased from DTC Memory
- Switch ignition OFF.