LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (On Board Diagnostic (OBD) - 2.8L VR6, AAA) >> Diagnostic Trouble Code (DTC) Memory, general information >> Selectable functions

Selectable functions

WARNING: This page is about a different car, the 1995 Volkswagen Jetta III, 1995 Volkswagen GTI, and 1994 Volkswagen Jetta III. However, it is still accessible from the selected car via links, so may be relevant.
SELECTABLE FUNCTIONS

Function Ignition switch on Engine idling
02 Check DTC memory x x
03 Output Diagnostic Test Mode (DTM) x -
04 Basic setting (1) - x
05 Erase DTC memory - x
06 End output x x
08 Read measuring value block (1) x x
(1) The display values for this function and descriptions of the associated measuring value blocks are described in the respective repair procedures. Other measuring value blocks and values output by the ECM are not currently used by service.