Work sequence

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen Cabrio, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Connect VAG 1551/1552 scan tool and, with ignition switched on, select "Engine Electronics" address word 01. See VAG 1551 SCAN TOOL (ST), CONNECTING AND SELECTING "ENGINE ELECTRONICS" ADDRESS WORD 01 .

Indicated on display

Fig 1: Readiness Code, Reading VAG 1551/1552 Scan Tool (Function 15) - 1 Of 3

Press buttons -1- and -5- to select "Readiness Code" function 15 and press -Q- button to confirm input.
- Must appear on display when all diagnosis functions have been successfully completed:

Indicated on display

Fig 2: Readiness Code, Reading VAG 1551/1552 Scan Tool (Function 15) - 2 Of 3

Press --> button.
Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.

Indicated on display (possible example)

Fig 3: Readiness Code, Reading VAG 1551/1552 Scan Tool (Function 15) - 3 Of 3

If one diagnostic checks has not run through successfully:

Press --> button.
Create readiness code. See READINESS CODE, CREATING .
Read the readiness code. If DTC memory has been erased, repair must be verified via appropriate display group. See READINESS CODE, CREATING .