LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (On Board Diagnostic (OBD) - 2.0L, Aba (A3 Platform)) >> VAG 1551 Scan Tool (ST), connecting and selecting "Engine Electronics" address word 01 >> Readiness code, creating >> Work step: 9 >> Procedure

Work step: 9: Procedure

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen Cabrio, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Display will appear as shown (1 -4 = display fields)

Fig 1: VAG 1551/1552 Scan Tool Display: Readiness Code, Creating, Work Step 9
G03365951
DISPLAY GROUP: 125 FUNCTION: 04

  Display fields
1 2 3 4
Display group: 125 Function: 04
Display xxxx rpm x.x % x.x % xxxx xxxx
Indicated Engine speed O2S adaptation at partial load O2S adaptation at idle Diagnostic conditions
Specification 800 to 880 rpm -23 to 23 % -12.4 to 12.4 % 0xx1 x100
x = Not relevant
Working range 800 to 6000 rpm -23 to 23 % -12.4 to 12.4 %  
RELEVANCE OF 8 DIGIT NUMBER BLOCK IN DISPLAY FIELD 4

Relevance of 8 digit number block in display field 4
1 2 3 4 5 6 7 8 Specifications of diagnostic conditions
0               Reduced correction range active
      1         Oxygen sensor control before three way catalytic converter active
          1     CYCLE Bit = Diagnosis completed
            0   Diagnosis malfunction free
              0 DTC memory malfunction free