LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (On Board Diagnostic (OBD) - 2.0L 4-CYL. 2V - Aba) >> On Board Diagnostic (OBD) >> Diagnostic Trouble Code (DTC) Memory, displaying blink codes >> Malfunction recognition

Malfunction recognition

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The MIL is illuminated when the ignition is switched on (check function). It stays on, going out once the engine has been started.

Each stored malfunction is represented by a four - digit numerical blink code. When the display is activated, the Malfunction Indicator Lamp (MIL) will illuminate and blink the four -digit code. Blink codes are listed along with Diagnostic Trouble Codes (DTC) in the DTC table. See ON BOARD DIAGNOSTIC (OBD)  .