Erasing DTC Memory
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
- Connect OBD1 adapter to DLC.
- Switch ignition ON.
- Leave adapter connected for at least 5 seconds, then disconnect.
- Connect OBD1 adapter for 2.5 seconds, then disconnect.
- Blink codes displayed
- Repeat until no more codes displayed (0-0-0- 0).
- Connect OBD1 adapter again for 2.5 seconds.
- DTC codes erased from DTC Memory
- Switch ignition OFF.