Work step 2: Erase DTC Memory

WARNING: This page is about a different car, the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, and 2000 Volkswagen Cabrio. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display:

Fig 1: Scan Tool Display - Work Step 2: Erase DTC Memory (1 Of 2)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press keys 0 and 5 for the function "Erase DTC Memory" and confirm entry with Q key.

NOTE: The readiness code is reset or erased each time the DTC memory is erased.

Indicated on display

Fig 2: Scan Tool Display - Work Step 2: Erase DTC Memory (Rapid Data Transfer)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

NOTE: If the ignition is switched off between "Check DTC Memory" and "Erase DTC Memory" the DTC memory will not be erased.

Press --> key.