Output Diagnostic Test Mode, initiating
WARNING: This page is about a different car, the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, and 2000 Volkswagen Cabrio. However, it is still accessible from the selected car via links, so may be relevant.
Output Diagnostic Test Mode (DTM) activates the following components in the stated sequence:
- - Cylinder 1 Fuel Injector -N30-
- - Cylinder 2 Fuel Injector -N31-
- - Cylinder 3 Fuel Injector -N32-
- - Cylinder 4 Fuel Injector -N33-
- - EVAP Canister Purge Regulator Valve -N80-
- - Secondary Air Injection (AIR) Solenoid Valve -N112-
- - Secondary Air Injection (AIR) Pump Relay -J299-