Nuts, bolts
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
- Nuts and bolts for attaching covers and housings must be loosened and tightened evenly, in an alternating pattern.
- Do not distort particularly sensitive parts, e.g. valve body, and loosen or tighten diagonally in stages.
- Tightening torques listed apply to unoiled nuts and bolts.
- Threads of bolts that are secured by locking fluid are to be cleaned with a wire brush. Then insert bolts with AMV 185 100 A1.
- Always replace self-locking nuts.