Reading measured value block, display group 04 - Checking Solenoid Valves while driving
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
- The Solenoid Valves can be checked while driving with the "Read measuring value block" function (08), display group number 04.
- The Display Group 04 - Checking Solenoid Valves While Driving table shows how the Solenoid Valves -N88-, -N89-, -N90- and -N91- are controlled in each selector lever position. The Solenoid Valves control the switching valves to the relevant gears.
- The Solenoid Valves -N92- and -N94- are supplementary valves that affect gear selection changes and are only controlled during gear changes. They are displayed in positions 5 and 6.
- VAG 1551 Scan Tool display field 1 is made up of 6 characters (0000 00) and is read as follows:Display Group 04 - Checking Solenoid Valves While Driving
Display on VAG 1551 Scan Tool (ST) Display field 1: Display 1 Display 2 Display 3 Display 4 Display 5 Display 6 -N88- -N89- -N90- -N91- -N92- -N94- - Non-activated Solenoid Valves are displayed by a "0"
- Activated Solenoid Valves are displayed by a "1"