Reading measured value block: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.

Connect VAG 1551 Scan Tool (ST), enter address word 02 for "Transmission Electronics" and advance Scan Tool program until "Select function XX" is indicated on display. See VAG 1551 Scan Tool (ST), connecting and selecting functions .

Indicated on display:

Fig 1: VAG 1551 Scan Tool Display - Reading Measured Value Block (1 Of 4)

G03362609

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press buttons -0- and -8- (to select function 08 "Read measuring value block")

Indicated on display:

Fig 2: VAG 1551 Scan Tool Display - Reading Measured Value Block (2 Of 4)

G03362610

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: VAG 1551 Scan Tool Display - Reading Measured Value Block (3 Of 4)

G03362611

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Enter display group number. See LIST OF SELECTABLE DISPLAY GROUPS .
Press -Q- button to confirm input.

Indicated on display:

Fig 4: VAG 1551 Scan Tool Display - Reading Measured Value Block (4 Of 4)

G03362612

Courtesy of VOLKSWAGEN OF AMERICA, INC.

There are always 4 display fields in the measured value block (displayed in physical units if necessary).

Key to interpreting individual values in display fields 1 through 4. See Test tables .