List of selectable functions
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTIONS CHART
| Function | See |
|---|---|
| 01 - Check Transmission Control - Module version | VAG 1551 Scan Tool (ST), connecting and selecting functions |
| 02 - Check DTC Memory | Diagnostic Trouble Code (DTC) Memory, checking |
| 04 - Initiate basic setting | Basic setting, initiating |
| 05 - Erase DTC Memory- | Diagnostic Trouble Code (DTC) Memory, erasing |
| 06 - End output | - |
| 08 - Read measured value block | Reading measured value block |
Further functions, which can be printed out by pressing the HELP button, need not be considered.
- After checking and completing a function, the VAG 1551 Scan Tool (ST) returns to the following start condition:
Indicated on display: