Installing piston rings and hooking ends together

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.

Place piston ring in groove.
To hook ends together press sides of ring in and guide ends over one another.
Do not twist piston ring out of groove on one side.

Fig 1: Installing Piston Rings And Hooking Ends: 3rd And 4th Gear Clutch With Pump Shaft (Transmissions From 01.93)

Courtesy of VOLKSWAGEN OF AMERICA, INC.