Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES
| Component | Specification |
|---|---|
| Drive shaft to flange | 45 N.m (33 ft lb) |
| Torque converter to drive plate | 60 N.m (44 ft lb) |
| Transmission to engine bolt M 12 | 80 N.m (59 ft lb) |
| Bolt M 10 | 60 N.m (44 ft lb) |
| Front mounting bracket to assembly mounting | 60 N.m (44 ft lb) |
| Left mounting bracket to assembly mounting | 60 N.m (44 ft lb) |
| Left mounting bracket to transmission | 25 N.m (18 ft lb) |
| Cover plate to transmission | 15 N.m (11 ft lb) |
| Ball joint to control arm | 35 N.m (26 ft lb) |
| Starter to transmission | 60 N.m (44 ft lb) |