Table of shims
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.
SHIM DIMENSIONS (PLANET CARRIER)
| Gap "x" - mm | Shim thickness - mm |
|---|---|
| 2.36 - 2.45 | 1.0 |
| 2.46 - 2.55 | 1.1 |
| 2.56 - 2.65 | 1.2 |
| 2.66 - 2.75 | 1.3 |
| 2.76 - 2.85 | 1.4 |
| 2.86 - 2.95 | 1.5 |
| 2.96 - 3.05 | 1.6 |
| 3.06 - 3.15 | 1.7 |
| 3.16 - 3.25 | 1.8 |
| 3.26 - 3.35 | 1.9 |
| 3.36 - 3.45 | 1.0 + 1.0 |
| 3.46 - 3.55 | 1.0 + 1.1 |
| 3.56 - 3.65 | 1.1 + 1.1 |
| 3.66 - 3.75 | 1.1 + 1.2 |
| 3.76 - 3.85 | 1.2 + 1.2 |
| 3.86 - 3.95 | 1.2 + 1.3 |
| 3.96 - 4.05 | 1.3 + 1.3 |
| 4.06 - 4.15 | 1.3 + 1.4 |
| 4.16 - 4.25 | 1.4 + 1.4 |
- Determine thickness of shims according to table and determine Part No. from parts catalog microfiche.
- After determining shim for -B1- carry out check measurement. See REVERSE GEAR BRAKE -B1- CHECK MEASUREMENT .