LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (4 SPD. Automatic Transmission 096 (A3 Platform)) >> Automatic Transmission - Controls, Housing >> ATF level checking and topping up >> ATF level, checking >> Checking conditions

Checking conditions

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Volkswagen Jetta III, 1995 Volkswagen Golf III, 1995 Volkswagen Cabrio, 1994 Volkswagen Jetta III, and 1994 Volkswagen Golf III. However, it is still accessible from the selected car via links, so may be relevant.

Operating temperature is measured with VAG 1551 Scan Tool (ST). See Reading measured value block . Check ATF level again and top up or extract as necessary.

It is essential that the ATF level is between the Min. and Max. markings.

CAUTION: Too much or too little ATF will affect the operation of the transmission. The ATF level must therefore be checked at regular intervals.
Fig 1: Identifying ATF Levels
G03362661Courtesy of VOLKSWAGEN OF AMERICA, INC.