Continued for all vehicles
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Release poly-ribbed belt tension, remove tensioning roller, See POLY-RIBBED BELT, REMOVING AND INSTALLING .
- Remove Generator (GEN).
- Remove Intake Air hose from AIR Pump Motor - V101-, and remove pressure hose between AIR Inlet Valve and AIR Pump Motor -V101-.
- Disconnect vacuum hose from AIR Inlet Valve.
- Disconnect dipstick tube from lower intake manifold.
- Disconnect AIR Inlet Valve from cylinder head.
- Disconnect 2-pin connectors from AIR Pump Motor (V101) and AIR Solenoid Valve -N112-.
- Disconnect AIR Pump Motor -V101- from lifting eye.