LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Fuel Supply - 2.8 L VR6 2V - AAA (A3 Platform)) >> Fuel Pump (FP) Module, removing and installing >> Evaporative Emissions (EVAP) system >> Installation position of EVAP Canister vent hose on upper intake manifold

Installation position of EVAP Canister vent hose on upper intake manifold

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Marks On Vent Hole And Upper Intake Manifold - EVAP Canister Vent Hose
G03365231
CAUTION: Vent hose must not come into contact with other components and must be routed over crankcase breather hose.
scientia non olet · About LEMON Manuals