LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Cooling System - 2.8 L VR6 2V - AAA (A3 Platform)) >> Coolant Thermostat Housing, Disassembling And Assembling >> Coolant pump, removing and installing >> Tightening torques

Tightening torques

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS

Fastener connection Tightening torque
Coolant pump to cylinder block 20 Nm (15 ft lb)
Pulley to coolant pump 25 Nm (18 ft lb)
Coolant expansion tank to body 10 Nm (7 ft lb)
Intake Air Temperature (IAT) Sensor (G42) to upper intake manifold 15 Nm (11 ft lb)
Drain plug in coolant pipe 10 Nm (7 ft lb)
Front exhaust pipe to Three-Way Catalytic Converter (TWC) 25 Nm (18 ft lb)