LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (2.8L VR6 2V Engine Mechanical - AAA (A3 Platform)) >> Engine - Cylinder Head, VALVETRAIN >> Cylinder head cover, removing and installing >> Installing

Cylinder head cover, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

NOTE:
  • Replace gaskets for cylinder head cover and upper intake manifold.
  • First secure upper intake manifold to lower intake manifold, then the two rear supports (CYLINDER HEAD, DISASSEMBLY AND ASSEMBLY , items - 4 - and - 32 -).
scientia non olet · About LEMON Manuals