Continued for all vehicles
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
- Remove cylinder head cover, see CYLINDER HEAD COVER, REMOVING AND INSTALLING .
- Install camshaft jig 3268.
- Jig 3268 must align with grooves in ends of both camshafts.
NOTE:
This condition, where the camshaft grooves are aligned, is only possible on every 2nd TDC position.