LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (2.8L VR6 2V Engine Mechanical - AAA (A3 Platform)) >> Engine - Assembly >> Engine, removing and installing >> Removing >> Vehicles with automatic transmission

Vehicles with automatic transmission

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, 1998 Volkswagen GTI, and 1997 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

See TRANSMISSION, REMOVING AND INSTALLING

Vibration damper end:

Flywheel end:

Fig 1: Attaching 2024A Engine Sling
G03365123
CAUTION: Use cotter pins on hooks and pins.
NOTE:
  • The end of the cross bar marked with installation positions 1-4 points toward the vibration damper.
  • The holes in the hooks are counted up from the hook end.