Diagnostic Trouble Code (DTC) memory, checking (function 02)

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Connect VAG 1551 Scan Tool (ST), input address word 02 "Transmission electronics" and press ==> button until "Select function XX" appears in display: See VAG 1551 Scan Tool (ST), connecting and selecting functions .

Indicated on display (select function):

Fig 1: Diagnostic Trouble Code (DTC) Memory Checking (1 Of 4)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press buttons -0- and -2- to select function 02, check Diagnostic Trouble Code (DTC) memory.

Indicated on display:

Fig 2: Diagnostic Trouble Code (DTC) Memory Checking (2 Of 4)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press -Q- button to confirm input.

The number of stored DTCs or "No DTC s recognized" appears in the display and are printed out one after another.

Fig 3: Diagnostic Trouble Code (DTC) Memory Checking (3 Of 4)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press key.
When the last DTC has been displayed and printed out, rectify malfunctions as described in DTC table, see DIAGNOSTIC TROUBLE CODE (DTC) TABLE .
Press ==> key.

Indicated on display:

Fig 4: Diagnostic Trouble Code (DTC) Memory Checking (4 Of 4)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

After checking DTC Memory and correcting malfunctions:

Erase DTC Memory, see DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, ERASING (FUNCTION 05) .