LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (1.9L TDI Engine Mechanical - AAZ, 1Z, AHU (A3 Platform)) >> Engine - Crankshaft, Cylinder Block >> Pistons and connecting rods, disassembling and assembling >> Piston position at TDC, checking >> Cylinder head gasket identification

Cylinder head gasket identification

WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1998 Volkswagen Jetta, 1997 Volkswagen Jetta, 1996 Volkswagen Passat, and 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If differing results are obtained when measuring piston position at TDC, use the largest measurement to select the correct gasket.
Fig 1: Locating Cylinder Head Gasket Identification Marks
G00416934Courtesy of VOLKSWAGEN UNITED STATES, INC.
scientia non olet · About LEMON Manuals