LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (1.9L TDI Engine Mechanical - AAZ, 1Z, AHU (A3 Platform)) >> Engine - Crankshaft, Cylinder Block >> Engine, disassembling and assembling >> Ribbed belt, removing and installing >> General Information

General Information

WARNING: This page is about a different car, the 1999 Volkswagen Jetta, 1998 Volkswagen Jetta, 1997 Volkswagen Jetta, 1996 Volkswagen Passat, and 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before removing the ribbed belt, mark the running direction. When installing the belt, make sure it is correctly seated in the pulley.
scientia non olet · About LEMON Manuals