Horn plate, removing

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Remove wire connector from horn plate.
Disengage retaining lugs -arrows- and remove contact plate -A- from contact plate -B-.

Fig 1: Removing Horn Plate

Courtesy of VOLKSWAGEN OF AMERICA, INC.

NOTE: The horn plate consists of two non insulated contact plates. Horn operates when the horn pad is pressed and plate -A- contacts plate -B-.