Radio (Deluxe and Premium), removing and installing: Installing
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Remove VW 160 radio removal clips from radio.
- Install all radio connectors.
- Install antenna cable and secure to radio.
- Slide radio into instrument cluster (rubber bushing on rear of radio must contact stop and radio must lock into place).
NOTE:
- Do not pinch or damage wires when installing radio.
- After reconnecting battery:
- Activate vehicle equipment such as radio, clock and power windows as per Repair Manual and/or Owner's Manual.
- On vehicles equipped with OBD II, activate readiness code