LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (4 SPD. Automatic Transmission 01M (A3 Platform)) >> Final Drive, Differential >> Final drive, adjusting >> Differential, adjusting >> Example:

Differential, adjusting: Example:

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
DRIVE PINION FRICTION TORQUE SPECIFICATION CHART

  Friction torque 
Pinion shaft (measurement) = 300 Ncm(1)
Differential (average) = 70 Ncm
Friction torque of differential + pinion shaft = 370 Ncm
(1) Insert the friction torque measured for the drive pinion if the bearings are used.
scientia non olet · About LEMON Manuals