LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (4 SPD. Automatic Transmission 01M (A3 Platform)) >> Automatic Transmission - Controls, Housing >> Transmission, removing and installing >> Tightening torques

Tightening torques

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES

Component Torque
Drive shaft to flange 45 N.m (37 ft lb)
Torque converter to drive plate 60 N.m (44 ft lb)
Transmission to engine bolt (M12) 80 N.m (59 ft lb)
Transmission to engine bolt (M10) 60 N.m (44 ft lb)
Front mount to assembly 60 N.m (44 ft lb)
Left mount to assembly 60 N.m (44 ft lb)
Left mount to transmission 25 N.m (18 ft lb)
Cover plate to transmission 15 N.m (11 ft lb)
Ball joint to control arm 35 N.m (26 ft lb)
Starter to transmission 60 N.m (44 ft lb)