Selector lever cable, checking and adjusting: Adjusting
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Selector lever in "P" position.
- Loosen selector lever cable bolt on selector shaft lever.
- Shift selector lever/shaft to "P". Parking lock should and it should not be possible to turn front wheels in same direction.
- In this position tighten bolt
- Tightening torque: 25 N.m (18 ft lb)