Ribbed belt (Generator) pulley, removing and installing
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Remove and install Generator (GEN) V -belt pulley using special tool 3310.
Tightening torque: 65 +/- 5 N.m (48 +/- 3 ft lb)
NOTE:
Special tool 3310 is included in VW Special Tool Package AT -119 (USA) and AT 000 119 (Canada).