Read measuring value block (function 08): Notes

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: 6 display groups display up to 4 measuring values each.

Connect VAG 1551 Scan Tool (ST), input address word 56 "Radio" and then press --> button, until "Select function XX" is shown in display.

Indicated on display:

Fig 1: Identifying VAG 1551 Scan Tool Display (Rapid Data Transfer)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press buttons -0- and -8- to select function 08, "Read measuring value block".

Indicated on display:

Fig 2: Identifying VAG 1551 Scan Tool Display (Read Measuring Value Block)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: Identifying VAG 1551 Scan Tool Display (Enter Display Group Number)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Enter desired display group number and press -Q- button to confirm input.

Indicated on display:

Fig 4: Identifying VAG 1551 Scan Tool Display (Read Measuring Value Block 1 2 3 4)

Courtesy of VOLKSWAGEN OF AMERICA, INC.

NOTE:

Interpreting measured values in individual display fields. See TABLE OF SELECTABLE DISPLAY GROUP NUMBERS .
With the printer switched on, the information on the display will be printed out.
Press --> button if measured value specifications are met in all display fields.