Overview of selectable display group numbers: Notes
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
Indicated on display: (1 to 4 display fields)
Fig 1: Identifying VAG 1551 Scan Tool Display (Cabrio From May 1999 - Read Measuring Value Display Group Numbers)
READ MEASURING VALUE DISPLAY GROUP, ANTI-THEFT IMMOBILIZER - CABRIO FROM MAY 1999
| Display group | Display field in display |
|---|---|
| 001 | 1 = Baud rate 2 = Induction coil 3 = Key condition 4 = Key authorized |
| 002 | 1 = Start procedure permitted 2 = Engine Control Module (ECM) responding 3 = Key condition OK 4 = Number of adapted keys |
NOTE:
The measuring value block always indicates the condition of the immobilizer that was valid after ignition was switched on. A change in this condition due to electrical malfunctions that occurred since ignition was switched on will not be indicated until ignition is switched on again and the function "Read measuring value block" is called up again.