Overview of selectable functions

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

SELECTABLE FUNCTIONS OVERVIEW - CABRIO FROM MAY 1999

Function No.	Function	Section
01 -	Check Control Module Versions	See VAG1551 Scan Tool (ST), connecting and selecting functions (check control module version)
02 -	Check DTC Memory	See CHECK DTC MEMORY
05 -	Erase DTC Memory	See ERASE DTC MEMORY
06 -	End Output	See END OUTPUT
07 -	Code control module	See IMMOBILIZER CONTROL MODULE, ADJUSTING AFTER REPLACING (CODE CONTROL MODULE)
08 -	Read measuring value block	See READ MEASURING VALUE BLOCK (FUNCTION 08)
10 -	Adaptation	See IGNITION KEYS, MATCHING (ADAPTATION) and ENGINE CONTROL MODULE (ECM), PROCEDURE AFTER REPLACING
11 -	Login procedure	See IGNITION KEYS, MATCHING (ADAPTATION)

NOTE:

Do not select the additional functions that are printed out via the HELP button.
After function is completed, the VAG1551 returns to the start position:

Indicated on display:

Fig 1: Identifying VAG 1551 Scan Tool Display (Cabrio From May 1999) (Select Functions)

Courtesy of VOLKSWAGEN OF AMERICA, INC.