Removing and installing vacuum reservoir

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

- Vacuum hose
Insert into reservoir 30 mm (1.2 in.)
- Rubber grommet
- Vacuum reservoir
- Nut
- Wheel housing liner
- Remove wheel housing liner.
  1. For Golf, GTI or Jetta , see WHEELHOUSING LINER, REMOVING AND INSTALLING
  2. For Cabrio, see WHEEL HOUSING LINER, REMOVING AND INSTALLING
- Remove vacuum hose -1- and nut -4- from reservoir.
- Remove reservoir.
- Install in reverse order of removal.

Fig 1: Removing Vacuum Reservoir

Courtesy of VOLKSWAGEN OF AMERICA, INC.