LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Heating & Air Conditioning (A3 Platform)) >> Air Conditioning >> A/C controls and mechanical components, servicing >> Removing and installing evaporator water drain valve

Removing and installing evaporator water drain valve

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
  1. - Water drain valve
  2. - Bulkhead
  3. - Water drain tube (on evaporator housing)
  4. - Mounting recess
    • To remove, carefully pull water drain valve -1- from drain tube -3-.
    • Install water drain valve so that valve flap opens from bottom.
    • Make sure valve flap is free of dirt, wax or undercoating; clean if necessary.
    5. Fig 1: Removing Evaporator Water Drain Valve
    G03363946Courtesy of VOLKSWAGEN OF AMERICA, INC.
scientia non olet · About LEMON Manuals