LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2001 >> Jetta GL, 2.0 B >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Heating & Air Conditioning (A3 Platform)) >> Air Conditioning >> A/C controls and mechanical components, servicing >> Removing and installing A/C cut-out thermal switch -F163- (2.0 liter engine code ABA)

Removing and installing A/C cut-out thermal switch -F163- (2.0 liter engine code ABA)

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2002 Volkswagen Cabrio, 2001 Volkswagen Cabrio, 2000 Volkswagen Cabrio, 1999 Volkswagen Jetta, and 1999 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Cooling system may be under pressure. Relieve system pressure before removing any engine coolant temperature sensors or switches.
  1. - Clip
  2. - Connection
  3. - O -ring
  4. - A/C cut out thermal switch -F163-
  5. - Harness connector
    Fig 1: Removing A/C Cut-Out Thermal Switch F163 (2.0 Liter Engine Code ABA)
    G03363948Courtesy of VOLKSWAGEN OF AMERICA, INC.
NOTE: Refill coolant to proper level after removing and installing A/C switches or sensors.
scientia non olet · About LEMON Manuals