Erase DTC Memory

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Test conditions:

DTC memory was checked

Press --> button.

Indicated on display (clear for next function selection):

Fig 1: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (1 Of 5)

Press buttons -0- and -5- to select "Erase DTC Memory", function 05.

Indicated on display.

Fig 2: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (2 Of 5)

Press -Q- button to confirm input.

Indicated on display.

Fig 3: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (3 Of 5)

Press ==> button.
Indicated on display (clear for next function selection):

Fig 4: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (4 Of 5)
NOTE:
- If this display is shown, the correct diagnostic sequence was not followed.
- Follow the test sequence exactly. First check DTC memory (function 02), then erase DTC memory (function 05).