Connecting VAS 5056 to driver's airbag components
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
(Driver airbag and lower steering column trim removed)
- Connect airbag igniter connector to terminal -1- of VAS 5056.
- Disconnect wiring harness to airbag spiral spring with slip ring.
- Connect yellow 2-pin connector -3- from VAS 5056/1 to airbag wiring harness at spiral spring connector.
- - Airbag igniter connector on VAS 5056 terminal
- - Button of VAS 5056
- - Connector of VAS 5056 to spiral spring with slip ring wiring harness connector