Gaskets, seals

WARNING: This page is about a different car, the 1999 Volkswagen GTI, 1998 Volkswagen GTI, 1997 Volkswagen GTI, 1996 Volkswagen GTI, and 1995 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Thoroughly clean mating surfaces, then apply sealing compound AMV 188 200 03
Apply sealant uniformly, not too thick
Always replace O-rings
Before installing radial shaft seals:
Pack space between sealing lips with grease, and apply light film of oil around outer diameter
After installing radial shaft seals:
Check gear oil level. Top off if necessary, up to lower edge of filler hole. For capacities and specifications, see CODE LETTERS, ENGINE/TRANSMISSION APPLICATIONS, RATIOS, CAPACITIES .