Removing and installing towing eye cover (lens): Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Insert screwdriver between turn signal housing -1- and towing eye cover (lens) -2-. Carefully lift cover (arrow) from plastic retaining clips located on turn signal housing.

Fig 1: Inserting Screwdriver Between Turn Signal Housing And Towing Eye Cover (Lens)
Detach spring clips from opposite side or from fog light housing -3- (if equipped) and remove cover from opening.
CAUTION: To avoid damaging the turn signal housing clips, insert a screwdriver between the housing - 1- and towing eye cover (lens) -2- and NOT between the cover and bumper opening or fog light.