Front bumper, removing and installing: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following list refers to items in Fig 1
.
- - Hex-head screw (four)
- 10 N.m (7 ft lb)
- - Carrier
- - Plastic foam
- - Plastic insulator
- - Guide
- Remove or install cover -8- by pulling out of or pushing into both guides (left and right) in parallel
- - Front side marker light -M11-
- - Spreader rivet
- Connects cover to wheel housing liner
- - Cover
- - Hex-head screw
- Qty: 8
- 23-25 N.m (17-18 ft lb)
- - Hex-head screw
- Qty: 4
- 30 N.m (22 ft lb)
- - Hex-head screw
- Qty: 2
- 5 N.m (44 in lb)
- - Hex-head screw
- Qty: 2
- 10 N.m (7 ft lb)
- - Cover element
- For painted covers only
- - Hex-head screw
- Qty: 5
- 4.5 N.m (40 in. lb)
- - Spoiler
- Fits into cover