Door window, removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Remove door trim. See DOOR TRIM .
Partially remove vapor barrier. See VAPOR BARRIER, REPLACING UP TO 12.93 or VAPOR BARRIER, REPLACING 01.94 AND UP .
Pull window slot seal off flange.
Crank door window upward or downward until clamping jaws are located in installation openings.
Remove hex nuts -1- and press clamping jaws apart.

Fig 1: Removing Hex Nuts And Press Window Clamping Jaws Apart (Front Door)

Pull door window upward, tilt toward front and lift out of window slot.