Central locking system pump and control module, removing and installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Open cable ties or disconnect retainer straps and remove housing sections -3-
- Disconnect multi-pin connector and bi-pressure hose from pump.NOTE: When connecting the multi-pin connector, make sure the bi-pressure hose is also properly connected.