Gas-filled strut, discarding
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1999 Volkswagen Jetta, 1999 Volkswagen Golf, 1999 Volkswagen GTI, 1998 Volkswagen Jetta, and 1998 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
- Clamp gas-filled strut in vise in area -x-.
Dimension x = 50 mm (approx. 2 in.)
WARNING:- The Gas-filled strut must be clamped only in the designated area -x-, otherwise there is danger of an accident!
- Protective goggles must be worn during sawing process.
- Cover the sawing area with a rag in order to catch oil spray.
- Saw through cylinder of gas-filled strut within first third of cylinder's overall length, measured from piston rod end of cylinder.NOTE: Dispose of oil and rags properly.